Autonomous vacuum, sweep and scrub — one pass, no operator
The CANAM C5 vacuums, sweeps and scrubs in a single pass, refills and drains itself, and returns to its station to charge. Maximum efficiency is 1,980 m² an hour.
Specifications from the C5 datasheet.
Three jobs happen together as the machine moves, at a 95% debris collection rate. One machine and one pass replace a vacuum, a sweeper and a scrubber run separately.
High water volume and 25 kg of scrubbing pressure across two counter-rotating rollers, for single-pass heavy stain removal.
The first design of its kind. Less residual water in floor gaps and cleaner water absorption.
Lidar plus four RGBD cameras working together for more reliable positioning, with anti-collision detection for obstacles and people.
The industry's first self-cleaning dirty water tank rinses itself in four minutes, cutting daily maintenance time by half.
It docks, takes on clean water, discharges dirty water and recharges in 1.5 hours. Access control and elevator linkage allow cross-floor and cross-zone cleaning.
Side brushes extend to the wall line, and the robot re-cleans spots it missed for closed-loop coverage.
24V 80 Ah gives three hours of continuous scrubbing, or up to twelve hours mopping, on a 1.5-hour charge.
Set your shift pattern and labor rate to see the daily cost of covering your floors. Everything recalculates as you type; nothing is sent anywhere.
Autonomous cleaning — commercial & industrial
Vacuum, sweep and scrub in a single pass.
The C5 handles charging, water refill, drainage and tank cleaning by itself, and moves between floors through access control and elevator linkage. It cleans up to 1,980 m² an hour.